Elevated Craft logo
Elevated Craft logo

All articles

Nakiri Knife: care, sharpening & storageUpdated 2 days ago

Washing & drying

  • Hand wash only with warm water, mild dish soap, and a soft sponge.
  • Dry the blade completely right after washing, before returning it to the stand.
  • Don't put it in the dishwasher, soak it, or use abrasive sponges or steel wool.
  • Don't leave citrus juice, salt, vinegar, or other acidic or salty residue on the blade for long periods.

Storage & the acacia stand

  • The stand is for storage and display, not drying. Storing the blade wet can cause surface spots and may affect the wood over time.
  • Keep the stand on a dry surface, away from standing water.
  • Make sure the knife is fully seated in the stand after use, and keep it out of reach of children.

Sharpening

With normal home use, the knife only needs occasional sharpening. To keep the edge performing well, always cut on a proper cutting board, and avoid glass, stone, ceramic, or metal surfaces, as well as bones and frozen foods. If the blade starts slipping instead of slicing cleanly, it's time to hone or sharpen it.

Sharpening angle: The blade has a 50/50 symmetrical grind at about 12° per side, so sharpen both sides evenly at that angle.

Can stainless steel rust or spot?

Yes. Stainless steel is stain-resistant, not stain-proof. Small surface spots can appear if the knife is left wet, soaked, run through the dishwasher, exposed to salty or acidic foods for long periods, or stored before it's fully dry. They're easy to prevent with the care steps above.

Removing surface spots

  1. Mix baking soda with a few drops of water to make a paste.
  2. Apply it to the blade only, and gently rub with a soft cloth or non-scratch sponge.
  3. Rinse, then dry the blade immediately and completely before storing.

For stubborn spots, a small amount of Bar Keepers Friend applied gently with a soft cloth works well. Avoid bleach, steel wool, and abrasive scrub pads.

More about your knife

Was this article helpful?